Osaka Prefecture University

Oxidation-tolerant Solid Electrolyte Provides High Energy Capacity for Li2S Cathode

LastUpDate: October 28, 2021

Researchers succeed in developing a lithium sulfide cathode containing a solid electrolyte with high decomposition resistance, enabling the realization of all-solid-state lithium-sulfur batteries that exceed the energy density of lithium-ion batteries

Recent advances on materials in development since the 1980’s at Osaka Prefecture University (OPU) bring all-solid-state batteries (ASSBs) a step closer towards reality.

ASSBs use a solid electrolyte (SE) that separates the energy-generating parts (cathodes and anodes) and has attracted attention as a safer, higher energy and power alternative to the inflammable liquid or gel electrolytes found in lithium-ion batteries. However, one major issue has been achieving ASSB energy densities that can match and potentially exceed those of Li-ion batteries.

In past work done at OPU, ASSBs with a cathode made up of a solid solution of lithium sulfide (Li2S) and lithium iodide were produced and found that during charge and discharge, the lithium iodide functioned as an ionic conduction path in the Li2S. This resulted in a higher energy capacity of the battery, suggesting that the key to increasing capacity was found in the nature of the lithium iodide conductor.

The team set out to explore this relationship by focusing on the electrochemical window of SEs – something that had been overestimated in previous calculations.

“Understanding the practical electrochemical window of SE for cathodes and anodes would allow for the construction of more efficient active material-SE interfaces and in turn support future research in increasing ASSB energy densities”, states Professor Akitoshi Hayashi.

Prof. Hayashi, together with a research team from the Department of Applied Chemistry, OPU Graduate School of Engineering, employed linear sweep voltammetry to investigate the oxidation onset voltages (OOVs) of SEs. They found that the OOVs of SEs employed in ASSBs with Li2S positive electrodes must exceed that of the Li2S by 0.2 V to achieve high energy capacity.

Schematic illustration of the discharge of ASSBs

The oxidation onset voltages (OOVs) of several solid electrolytes (SEs) were determined for all-solid-state Li/S batteries with Li2S as a high-capacity active material. The OOVs of SEs must exceed that of Li2S by more than 0.2 V to achieve high capacity.
Developed electrodes using Li2S and pseudobinary Li-oxyacid salts achieved high areal capacities in all-solid-state battery.

“Finding the acceptable electrochemical window for high-capacity charges is only half the solution”, states Associate Professor Atsushi Sakuda. “The next step was to discharge all this energy, which depended on the ionic conductivity of the SE”.

Here, the team explored the oxidation stabilities of several lithium salts and found that nanocomposite electrode composed of Li2S and pseudobinary Li-oxyacid salts, which had been discovered by research done in 1987 by the university’s current President Masahiro Tatsumisago, showed the best performance in the reported all-solid-state Li2S batteries. “We developed a Li2S-based nanocomposite cathode with a SE having both resistance to electrochemical decomposition and relatively high ionic conductivity”, states Dr. Takashi Hakari.

The insight obtained from this study allowed the team to fabricate a high capacity Li2S-based nanocomposite cathode using a solid electrolyte with oxidation tolerance. The next step for the research team is to turn this creation into an all-solid-state lithium-sulfur battery with twice the energy density of a lithium-ion battery.

Paper Information

Journal title: Advanced Functional Materials
Paper title: Solid electrolyte with oxidation tolerance provides a high-capacity Li2S-based positive electrode for all-solid-state Li/S batteries

Funding Information

The Japan Science and Technology Agency (JST) Strategic Research Promotion Program, Advanced Low Carbon Technology Development, Special Priority Technology Area “Next Generation Battery” (ALCA-SPRING) (JPMJAL1301).

Contribution to the SDGs

sdgs 7,9 icons

7: Affordable and clean energy
9: Industry, innovation, infrastructure

Related Links

Contact:

Department of Applied Chemistry, Graduate School of Engineering
Dr. Atsushi SAKUDA

E-mail saku[at]chem.osakafu-u.ac.jp *Please change [at] to @.
永久免费A片在线观看全网站-国产成人综合亚洲色就色